| CAN-Touch The CAN-Touch is a 10“ LCD monitor with a touch-sensitive surface. It provides a display and operating interface for the freely programmable UVR1611 control. As many pages as required can be defined so that the system schematic diagram is optimally portrayed. Moreover pages can also be protected by PIN queries, so that, for example, they are only available to the fitter. Any values of the controller can be displayed on the individual pages, where these values can also originate from several controllers. Controller parameters can be changed directly via the CAN-Touch. (e.g. time windows, nominal temperatures etc.)
To startup the device it is merely necessary to transfer the system schematic to the CAN-Touch and select the desired controller values. This takes place via proprietary parameterisation software which is supplied with the device. Data transfer between the PC and CAN-Touch takes place via the supplied SD card.
The measurement values can be displayed on the CANTouch and transferred via the CAN network. A CAN power pack, which is supplied with the device, is required for power supply to the CAN-Touch.
01/CAN- TOUCH
Touch screen for wall mounting including CAN power pack, SD card (including parameterisation software) and operating pen
01/CAN-TOUCH/TFS
As for CAN-Touch, but with integral CT-TFS sensor module for measuring room temperature, room humidity and the dew point.
01/CT-TFS
Sensor module for measuring room temperature, room humidity and the dew point for retrospective fitting to the CAN-Touch
Available in black (BK) and from April 2012 in silver (SI) too.
Art. no. 01/CAN-TOUCH-BK
01/CAN-TOUCH-SI
01/CAN-TOUCH/TFS-BK
01/CAN-TOUCH/TFS-SI
01/CT-TFS | Device dimensions (W/H/D): | 23,4/19,1/3,8 cm | | Display diagonal: | 10“ or 25,4 cm | | Display: | 20,28/15,20 cm | Mounting:
| Wall mounting / VESA-75 holes | | Width-to-height ratio: | 4:3 | | Physical resolution: | 1024(H)x768(V) | | Number of colours: | 65.536 | | Brightness: | 220 cd/m² | | Contrast: | 600:1 | | Backlight: | White LED | | Operating voltage: | 12V DC | | Viewing angle (type) hor./ver.]: | 150°/130° | | Touch panel: | 4-wire resistive | | Touch panel lifetime (touches): | >10 000 000 | | Surface hardness: | 3 H | | Amount of pressure: | 20 – 150 g | | Connections: | CAN / (Ethernet ready) | | Programming: | via SD-Card | | SD card: | File system FAT16 or FAT32 | | Power supply (power pack): | 230V AC / 12V DC | | Protection class: | IP20 | | Permissible ambient temperature: | +10°C to+40°C | | Other properties: | Touch stylus integrated in the housing | | 
CAN-Touch Dimensions: 234 x 191 x 38 mm 
 CT-TFS |
|
09.11.2011 
920.64 KB 1578
Deutsch 