Downloads - UVR1611

Downloads

Procedure to update the controller UVR1611:

Download the latest version of the program ’Memory Manager’ from our homepage and install it.
Update the Bootloader with the latest firmware.
Download the firmware of the UVR1611 (self extracting ZIP archive) in the favoured language.
Extract the ZIP archive via double-click. The generated PRG-file should be stored in the path “C: Programs Technische Alternative Memory Manager Betriebssystem_UVR1611“.
The new firmware (*.prg) can be stored at the Bootloader with the program ’Memory Manager’ (“firmware upload (PC -> Bootloader)“)
Connect the Bootloader via CAN bus to the UVR1611.
Activate the firmware update on the UVR1611 and press the button “START” at the Bootloader.
A CAN-Monitor connected to the controller should also be updated to the latest version.

README! - Information of changes and compatibility

Please note:

Controller with a boot sector < B1.02 can only be updated in our factory!
On devices with a serial number higher 41674 firmware < 3.00 is not executable.
On devices with a serial number smaller 41674 you particularly should use firmware A2.28. The firmware A3.xx should only be used on this devices when a new functionality of the new Version is necessarily needed. The firmware A3.xx is basically designed for devices with a serial number higher 41674, on older devices there is a appreciable slower response time at the handling. After a factory update the system can also be operated with a OS 3.xx. The second Analog output is missing, however.
Controllers with a serial number less than 3990 can be updated only to OS A2.28.

Subcategories:

Version A3,25		Files: 10

Version A2.28		Files: 10

No files available yet for this category!

Page: 1 of 1

Memory Manager 2.07	17875
Winsol 1.22	10319
Alle TAPPS Anwendungsbeispiele	8616
TAPPS 1.29 DE	8517
Kennlinie KTY, PT-1000	8514
Manual UVR1611 DE 3.25-3	7468
BL-NET 1.43	6297
TAPPS 1.28 DE	6123