PT1000/KTY

RASPT provides the possibility of changing the room Temperature in heating mode by approximately +/- 4°C and making the selection between the individual operating modes (normal, lowered or automatic mode or frost protection).

The room sensor is available as PT1000 (RASPT) und KTY (RAS)  version.
Temperature range: from 10°C to 40°C.

Temperature-resistant sensor with 2 m silicone cable for collector, supplied with connection box and overvoltage protector.

KF: Standard, semiconductor characteristics, permanent use at up to 180 °C,
chromed brass sensor cap, 6 x 20 mm.
Art. no.: 01/KF

KFPT1000: Use at up to 240 °C for short periods, PT1000 characteristics,
chromed brass sensor cap, 6 x 40 mm.
Art. no.: 01/KFPT1000

KFPT1000 in 4x40 mm,  Use at up to 240 °C for short periods

Art. Nr.: 01/KFPT10004x40MM

Sensor with 2 m cable

BF: Standard, semiconductor characteristics, up to 90 °C,
chromed brass sensor cap, 6 x 20 mm.
Art. no.: 01/BF

BFPT1000: High accuracy with PT1000 characteristics, up to 180 °C,
chromed brass sensor cap, 6 x 40 mm.
Art. no.: 01/BFPT1000

BFPT1000 in 4x40mm Ausführung, up to 180 °C

Art.Nr.01/BFPT10004x40MM

Temperature-resistant sensor with 2 m silicone cable for use in boiler area, semiconductor characteristics, permanent use at up to 180 °C, chromed brass sensor cap, 6 x 20 mm.

Art. no.: 01/KE

Brass installation kit + ultra-fast sensor for sanitary water heating. Brass screw connection, 1/2’’ male thread + ultra-fast sensor

Art. no.: 01/MSV+SSPT

FTS2-32DL / FTS4-50DL / FTS5-85DL / FTS 9-150DL

Der elektronische Volumenstromsensor FTS basiert auf dem Prinzip der Karman‘schen Wirbelstraße. Ein in der Strömung stehender Staukörber erzeugt Wirbel. Diese werden durch ein piezoelektrisches Paddel detektiert und durch die integrierte Elektronik ausgewertet. Ein Mikroprozessor wandelt die analogen Messwerte in ein für den DL-Bus (Datenleitung) geeignetes serielles Digitalsignal um.

Art. Nr.: 01/VFS1-12
Art. Nr.: 01/VFS2-40
Art. Nr.: 01/VFS5-100

The flow switch is used as a detector for sanitary water heating. It switches when the flow reaches approx. 1.5 litres/minute, has a permissible temperature range of up to +70 °C, a 1’’ male thread, and a 1’’ union. It must be fitted vertically, with flow from bottom to top.

Art. no.: 01/STS01AC alternating current version 230 V AC / 1.5 A
Art. no.: 01/STS01DC direct current version 30 V AC / 10 mA

The humidity sensor was designed for controling tasks in the field of air conditioning in combination with UVR controls. The integrated microprocessor records the humidity and the temperature. Thus, the user can issue between the humidity or dew point selection. The circuit behaves as a temperature sensor at the controller. A separate supply is not required.

Art.Nr. 01/RFS

The differential pressure sensor DDS-DL is based on the principle of two silicon membranes rotated at 90° relative to each other so that they deflect under the differential pressure. The ohmic resistance which changes as a result of the deflection is captured as the measured variable. The displacement of the membranes relative to each other guarantees, even at the least pressure, position-independent signal accuracy. A microprocessor converts the differential pressure signal into a serial digital signal suitable
for the DL-bus (data link).

Art.Nr.01/DDS-DL

Records temperatures at up to 600 °C. Measuring amplifier converts sensor signal into temperature (display value reduced by a factor of 10).
Art. no.: 01/THEL

Measuring amplifier for thermocouple of type K (without thermocouple).
Art. Nr.: 01/THEL-MV