You are here: Products / x2 | operation & interfaces / CMI-S for switching cabinets

CMI-S for switching cabinets

[Translate to Englisch:]
[Translate to Englisch:]
[Translate to Englisch:]
[Translate to Englisch:]

C.M.I. Control and Monitoring Interface for switching cabinets

The CMI-S is an interface for convenient system monitoring, remotecontrol, data logging and visualisation of all controllers with CAN bus.

Icon x2techIcon Interfaces
  • Remote maintenance of CAN bus devices
  • Function data administration for CAN bus devices
  • Operating system management for CAN bus devices
  • System visualisation via PC, smart phone or tablet
  • Revision of parameters of CAN bus devices
  • Data logging via CAN bus
  • Event-controlled notification via e-mail
  • DIN rail mount
  • Option to connect to Modbus TCP

Operation/access: 

Interfaces: 

  • CAN bus
  • Ethernet (RJ45)
  • Modbus TCP/IP
  • Micro SD card

TA-Designer

End users operate the system via simple user interfaces. With the TA-Designer, you can create these interfaces to suit your project.

Linux:

Two installation methods for Linux are supported:

  • Debian package (.deb) (e.g. Debian, Ubuntu, Mint)
  • RPM package (.rpm) (e.g. Fedora, openSUSE, Mageia)

Both methods add a menu entry to the GNOME or KDE menu with which the programme can be started. For the installation root permissions are required.

Debian package

The package can basically be installed simply by double-clicking it in the file manager. If this is not possible, the installation can be done with the command line programme dpkg in a terminal window:

dpkg -i ta-designer-1.26-amd64.deb

For the installation, root permissions are required. To do this, either enter su before executing the command, followed by the corresponding password prompt, or precede the command with sudo and enter the password when prompted.

RPM package

In principle, the package can be installed simply by double-clicking on it in the file manager. If this is not possible, the installation can be done with the command line programme rpm in a terminal window:

rpm -i ta-designer-1.26-x86_64.rpm

To update the programme (an older version is already installed), -U should be used instead of -i.

For the installation, root permissions are required. To do this, either enter su before executing the command, followed by the corresponding password prompt, or precede the command with sudo and enter the password when prompted.

Winsol

Winsol enables the recording and evaluation of the data recorded by the data logger (C.M.I., BL-NET or D-LOGG).

Attention: The firmware of the datalogger might have to be updated to use it with the current version of Winsol!

Supported dataloggers:

  • C.M.I. - version 1.25 and above
  • BL-NET - version 2.17 and above
  • D-LOGG /BL232 - version 2.9 or above

Linux:

Three methods of installation for Linux are supported:

  • Debian package (.deb) (e.g., Debian, Ubuntu, Mint)
  • RPM package (.rpm) (e.g., Fedora, openSUSE, Mageia)
  • Raspberry Pi (.deb) version 3 and above

A menu entry is added to GNOME or the KDE menu, with which the program can be launched. Root authorization is required for installation.

Debian package

The package can be installed simply by double clicking it in the file manager. If this is not possible, the installation can be done using the command line program dpkg in a terminal window:

dpkg -i tapps2-1.12-amd64.deb

Root authorization is required for the installation. For this, either simply enter su before executing the command, followed by the respective password query, or prefix the command sudo and enter the password when queried.

Note: When using Ubuntu 18.04, the package "libcurl4" might need to be installed to execute Winsol (sudo apt-get install libcurl4).

RPM package

The package can be installed simply by double clicking it in the file manager. If this is not possible, the installation can be done using the command line program rpm in a terminal window:

rpm -i tapps2-1.12-x86_64.rpm

To update the program (when an older version is already installed), -u should be use instead of -i.

Root authorization is required for the installation. For this, either simply enter su before executing the command, followed by the respective password query, or prefix the command sudo and enter the password when queried.

Raspberry Pi package

The package can be installed simply by double clicking it in the file manager. If this is not possible, the installation can be done using the command line program dpkg in a terminal window:

dpkg -i winsol-2.21-armhf.deb

Root authorization is required for the installation. For this, prefix the command sudo and enter the password when queried.

B2B Sales

Professionals can order by e-mail, stating their customer number.

Related products

Downloads

Program Libraries, price list, manuals and more ...

Support

professionel support, service and frequently asked questions

Upcoming Courses (German only)

Expertenseminar (3 Tage)
in 3872 Amaliendorf Details
Einsteigerseminar UVR16x2 inkl. Visualisierung (3 Tage)
in 50668 Köln Details
Einsteigerseminar UVR16x2 inkl. Visualisierung (3 Tage)
in 3872 Amaliendorf Details